Roman Shades

Roman Shades Throughout Fortville

Soft folds for the plat's tall old openings

Call (317) 999-5154Get Free Quote
Quick Answer

These are the questions we field most often about this product. Several of the answers include a caveat. That's deliberate, because a caveat before the sale is far cheaper than a complaint after one.

  • Service: Roman Shades for Fortville homeowners
  • Service area: Fortville, IN and surrounding areas
    • Two different timelines apply. New custom product takes weeks because it has to be made. Repairs to what's already hanging, a cord lock, a ladder string, a chain that jumped the clutch, are usually far quicker.
  • Insured and bonded
  • Serving Fortville, IN since 2008
Roman Shades Services

Expert Roman Shades for Fortville Homes

Roman shades are a fabric answer to a hard surfaced house, and Fortville's 1849 plat is full of hard surfaced houses. The 288 units the ACS records as pre-1940 sit on Walnut Street, Staat Street, Pearl Street and School Street, and inside them you get wood floors, wood trim and plaster returns in the oldest. A soft fold of fabric across the top of a tall opening is often the only textile in the room besides a rug. Those openings help too: they run tall with high head heights, which is exactly the geometry a Roman shade wants, and the Browne-Rafert House on North Merrill Street is a fair picture of the type.

Yardage is the obvious cost. The two that surprise people are fabric movement and matching. Fabric orders are cut from a bolt, so a shade added a year later comes from a different dye lot and can read half a shade off next to the original, which is very visible when two windows share a wall. Fabric also responds to humidity, and Fortville's muggy season runs from about May 25 to September 22, so a shade in a poorly ventilated bathroom will hang differently in August than in February. And on the out of square openings that dominate a 175 year old plat, a flat fold Roman shows every degree of the error along its bottom edge.

When to Call

Signs You Need Roman Shades

If you notice any of these in your Fortville home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

Sound bounces around a tall room with nothing soft

A wide fabric shade dips along its bottom edge

You want pattern without covering the whole wall

One shade hangs lower on the left side

The room echoes off hard floors and bare windows

The fabric you loved is nearly discontinued

A raised shade covers the top of the glass

A window seat has nothing usable on it

Cloth over the cooktop has gone dark and greasy

Cords hang beside a window a child uses

Our Process

How Fortville Window Treatments Handles Roman Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

In-home measure and fabric review

2

Order placed, finished sizes confirmed

3

Ring spacing set to width

4

Care and cleaning explained first

5

Extra yardage set aside

Real Project Photos

Roman Shades in Fortville

Photographs from real roman shades jobs completed by our crew in Fortville and surrounding areas.

Custom shades measured and installed in Fortville
Scope of Work

What Roman Shades Includes

Every Fortville job is documented item by item. Here is what the crew covers.

Three widths and three heights taken at every opening, then a diagonal check so the shade hangs level

Mounting depth read at the top of the opening to see whether the stacked folds clear the trim on an inside mount

Stack height calculated from finished height, fold count and lining, then shown to you before anything is ordered

Outside mount height set above the opening wherever the stack would otherwise sit across the glass

Fold style specified room by room: flat, relaxed, hobbled or London

Fold count and fold depth written on the order so the bottom fold doesn't come up short

Lining specified per elevation, light filtering or room darkening or none, and stated in writing

Interlining added where the face fabric needs body or where the room wants weight and quiet

Pattern repeat measured so the motif lands at the same height on every shade in a room

Fabric run direction decided against the width, since a wide shade may need the goods turned

Ring rows and dowel pockets drawn to the fold spacing instead of a factory default

Lift chosen as cordless, a continuous cord loop with a tensioner, or a motor

Cord safety handled to ANSI/WCMA A100.1-2022, with cordless specified anywhere a child can reach

Mounting board wrapped in the face fabric where the board itself will show from the room

Return depth dimensioned on outside mounts so the sides close off against the wall

Brackets fastened into framing or into anchors rated for a lined shade's weight, not into bare drywall

Shades steamed on site so the creases from folding and shipping fall out of the cloth

Folds dressed by hand and the shade cycled a few times so every fold trains and breaks in the same place

Pricing

What Roman Shades Cost in Fortville

National category figures put stock shades at roughly $60 to $600 per window and custom-fabricated shades at roughly $250 to $2,600 per window. Those are national ranges published for a category, not a price for any address in Fortville, and Fortville Window Treatments quotes from a measure rather than an average. Romans usually sit in the upper part of that band, because what you're buying is yardage and sewing rather than cloth wrapped on a tube. Fabric moves the number first and it's sold by the yard, so a large pattern repeat adds cloth before anyone cuts. Lining and interlining come next. Then fold style, since a hobbled shade eats noticeably more fabric than a flat one of the same size. Two Hancock County windows of identical size can land far apart on cloth alone.

By Product

How Roman Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Flat Roman: One uninterrupted face of fabric when the shade is down, with folds appearing only as it rises. It shows a print or a weave better than any other style, and it's the one we specify in rooms that want a quiet, tailored line.

Relaxed Roman: Built without a dowel in the bottom fold, so the hem carries a soft curve instead of a straight line. It suits a kitchen window over a sink or a casual room, and it forgives a slightly unlevel opening better than a flat shade does.

Hobbled Roman: Permanent cascading folds stay stacked down the whole face whether the shade is up or down. It reads soft and traditional, it uses considerably more yardage, and it stacks much taller when raised. Plan the mount height around that.

London shade: Gathered at two points with soft tails falling at each side, usually hung as a stationary treatment or one that gets raised rarely. It's a decorative shade for a powder room, a stair landing or a window that never needs daily operation.

Dowel and ring construction: Rods sit in sewn pockets across the back and rings carry the lift cord. Pocket spacing sets fold depth, and drawing it against the finished height is how you avoid a runt fold at the bottom of an odd-height window.

Cotton sateen lining: The standard backing. It gives the shade body so folds hold their shape, it slows fading of the face fabric, and it puts the same neutral face toward the street from every window on an elevation.

Interlining: A soft flannel layer between face fabric and lining. It thickens the fold, quiets the room a little, adds real insulating bulk at a cold January window, and it turns a thin decorator fabric into a shade with weight.

Cordless lift: A spring-assisted mechanism raises and lowers the shade by hand with no loop hanging anywhere. It's the default in nurseries and any room a child uses, and on a lined Roman it wants correct spring sizing for the actual fabric weight.

Motorized Roman: A battery or hardwired motor lifts the shade on a remote or a schedule. It earns its keep on a shade above a stair, over a sink or on a tall window, and battery wands need changing about once a year.

Wrapped mounting board: The board the shade staples to, covered in the face fabric so it disappears when the shade is mounted outside the opening. Without it you see raw lumber above the shade from anywhere in the room.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Fortville room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Roman Shades FAQ

Questions we hear most often from Fortville homeowners considering roman shades.

Flat fold is the crispest and the least forgiving. It reads tailored against original trim and it shows any lean in the opening along the bottom edge, which on a house from the 1870s to 1930s stock is a genuine risk. A relaxed or soft fold style carries a gentle curve at the hem that hides a small amount of error and suits an older room better. A hobbled style holds permanent folds all the way down, uses more fabric and sits proud of the glass. In a Church Street parlor with a tall opening we usually land on relaxed. In a 2010s house on Sedalia Drive we'd go flat.
Mount the board above the opening rather than inside it. The folded stack has to live somewhere, and inside an opening it lives on your glass. On the tall openings with high head heights in the 1849 plat there's usually casing and wall between the trim and the ceiling, so we mount the board on the wall above and let the stack sit on plaster instead of view. That also lets us widen the shade past the opening to cover the side gaps. In the newer plats where the opening runs close to the ceiling and there's no casing at all, that room isn't there and the stack is a real cost.
Three practical choices and they change the product completely. An unlined shade glows, shows the fold structure from outside and gives almost no privacy at night. A standard light filtering liner evens the color from the street, adds body so the folds hold, and protects the face fabric from the sun. A blackout liner adds real darkness but also weight and stiffness, and the fold lines will show as light bars from outside. On the west facing rooms in the Geist facing plats we always line, because face fabric taking direct sun off the water gives up its color faster than anyone expects.
Not exactly, and the closer the two shades hang the more you'll see it. Decorator fabric is woven and dyed in runs, and two runs of the same pattern differ in ground color, in print registration and sometimes in hand. If the new shade goes in a different room, it's a non issue. If it goes on the same wall in a Blossom Trace family room, we'd rather order the extra yardage now and store it than gamble on the mill. Where the budget won't stretch, we buy the full yardage for both shades in one cut and fabricate the second one later.
It can, and we'd want to talk about it first. Fabric absorbs moisture and cooking grease, and neither leaves easily. In a Fortville kitchen in the older grid where the counter sits close under the opening, a Roman shade will collect what the stove puts out. A tight synthetic face fabric survives that better than a linen. In a bathroom with real ventilation it's fine; without it the folds will sag differently through the muggy stretch from late May to September. Where the room is genuinely wet, a faux wood blind or a solar shade does the job and cleans with a cloth.
Weight decides it. A lined Roman on a tall opening in the 1849 plat gets heavy, and a lift system that feels light on a small shade feels like work on a big one. A cordless lift is the right default in any room a child uses, and Fortville averages 2.7 persons per household, so that's most family rooms here. Above a certain size we specify motorization, which runs a national installed range of $300 to $1,500 a window and removes the question. On a shade you'll raise twice a year, a simple lift is fine and you shouldn't pay for a motor.
More than most people picture, and this is the part nobody asks about until it's hanging. A raised Roman gathers into a stack of folded cloth at the top, and that stack has real depth. A lined shade on a tall window can take up a foot or more of height when it's all the way up. On an inside mount, that stack sits over the top of the glass all day. The fix is knowing the number before you order, which is why we calculate it at the measure and show it to you.
Start with the room rather than the catalog. A flat Roman is the cleanest and shows a pattern best, so it goes in rooms that want a tailored line. A relaxed shade has a soft curve in the hem and reads casual, which suits kitchens and cottage-style rooms. Hobbled keeps its folds all the way down and looks traditional, but it uses more cloth and stacks taller. A London shade is decorative and mostly stationary. We bring samples of the same fabric made three ways so you can see it rather than imagine it.
Inside looks cleaner and shows off your trim, but it needs depth, and the stack still lands over your glass when the shade is up. Outside mount is what we reach for when the view matters, because the board can go well above the opening and the whole stack sits on wall instead of window. Outside also closes off the light gaps at the sides. In a Fortville room with a view worth keeping, outside mount is usually the right call even though it covers a little trim.
A room darkening or blackout lining stops light coming through the cloth, and that's genuinely most of the light. What it can't do is stop light coming around the shade. An inside-mounted Roman leaves a gap at each side, and light walks straight through it. For a bedroom that has to be dark, you want an outside mount with generous overlap, or a blackout roller with side channels underneath and the Roman on top for looks. We'd rather say that now than after you've paid for lining.
Yes, and in most houses you should. Cordless lift uses a spring mechanism you operate by grabbing the hembar, and motorized removes the question entirely. ANSI/WCMA A100.1-2022 is the product safety standard this trade works to, and inner cords that aren't compliant are treated as a substantial product hazard under 16 CFR 1120.3. On a heavy lined shade the spring has to be sized to the actual fabric weight, so tell us about the lining before the order goes in, not after.
Wider than you'd think and narrower than you'd like. Fabric shades get heavy fast, and past a certain width the cloth starts to sag between the rings and the lift gets hard to work. On a wide opening we'll usually split it into two shades on one board, matched at the pattern so they read as a pair. That also keeps each shade at a weight a person can raise without a fight. The exact limit depends on the fabric and the lining, which is why we decide it at the window.
Because you're buying cloth by the yard and then paying someone to sew it. A shade that takes four yards of a mid-priced fabric and a shade that takes seven yards of an imported weave aren't in the same conversation, and the second one hasn't even reached the sewing table yet. Pattern repeat adds yardage on top, since motifs have to land at the same height across a room. Fold style adds more. We figure yardage during the quote so the number isn't a surprise on the order.
They will if the shade was built and dressed properly. Fold spacing is set by the dowel pockets and ring rows, so it's baked into the construction rather than something that drifts. What does go wrong is a shade that was never trained: it arrives folded flat from the factory, gets hung, and the shipping creases live in the wrong places forever. We steam on site, then dress each fold by hand and cycle the shade so the cloth learns where it bends.
In a kitchen, yes, with sense about placement. Fabric near a cooktop takes on grease and cooking smells, so we keep Romans on the window over the sink and off the window beside the range. In a full bathroom with a shower running daily, fabric holds damp and the folds can hold it longer. A poly shutter or a moisture-tolerant shade does better in that room. A powder room with no shower is fine, and a London shade there looks terrific.
Vacuum the face with a brush attachment a few times a year, working down the folds rather than across them. Steam wrinkles out instead of pressing them. For anything worse, use a cleaner who handles fabric window treatments specifically and will take the shade down and rehang it. Do not put a lined Roman in a washing machine. Face fabric, lining and interlining shrink at different rates, and the shade comes out with a wavy hem that nothing fixes.
A roller is the working answer: it rolls onto a tube, takes almost no height when it's up, and handles glare and privacy cheaply. A Roman is the design answer, because folded cloth softens a room in a way a flat panel of fabric on a tube never does. Rollers win on tall windows where stack height would eat the view and in rooms where you raise and lower every day. Plenty of houses use both, with rollers on the working windows and Romans where the room is meant to feel finished.
Sometimes, and plan as if you can't. Decorator fabric runs in dye lots, and a bolt woven a year from now can sit slightly off the one your shades came from. On the same wall in daylight, that difference shows. If you know a second phase is coming, buy the yardage now even if the sewing waits. Either way we record the fabric name, the lot and the finished sizes on your file, which gives a reorder a real chance instead of a hope.
It's a soft flannel layer sewn between the face fabric and the lining, and it does three things at once that are hard to get any other way. It gives the fold depth and a rounded edge instead of a sharp crease. It quiets a hard-surfaced room. And it puts real bulk between the room and a cold window in January, which you feel standing near the glass. It also adds weight, so the lift and the brackets get sized for it.
Yes, and it's a common way to finish a room. The Roman does the working part, handling glare and privacy at the glass, while the panels add height and softness at the sides. Two things to check at the measure: the drapery rod needs enough projection to clear the raised stack of the Roman, and the shade's mounting board has to sit where the rod brackets won't fight it. Get the order wrong and the panels rub the shade every time they move.
Areas We Serve

Roman Shades Across Fortville

We measure and install in every one of these Fortville neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Fortville

Fortville Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Fortville

Wood looks that ignore Fortville humidity

Learn more →

Wood Blinds in Fortville

Real basswood for Fortville's original stained trim

Learn more →

Vertical Blinds in Fortville

Door walls and wide low openings, handled honestly

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Fortville

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Fortville, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 999-5154
Service area

Serving Fortville and the surrounding area

Call NowGet Quote